Lenselink Zaaglijst
Basket
Prices
NLEN

Furniture panels cut to size

Furniture panels cut to size

Melamine-faced panels from Unilin and EGGER, cut to the millimetre and finished with matching edge banding. Ready to assemble.

Choose your board How does it work?
  • 427decors and board sizes
  • 8–38 mm13 thicknesses
  • €12.29per m², from (incl. VAT)
  • ± 2 weeksdelivery time
Fixed price up front Delivery time approx. 2 weeks Matching edge banding in 1 or 2 mm Collection in Beringe or delivery in NL & BE

Types

Two cores, the same decor

Most decors are available on both a chipboard and an MDF core. The decor and edge banding are the same; the core determines how the panel behaves.

  • Melamine-faced chipboard

    The most popular base for cabinets, shelves and surrounds. Light, stable and affordable.

    Thicknesses
    8, 10, 10.6, 12, 16, 18, 18.6, 22, 25, 25.6, 28, 28.6, 38 mm
    Board size
    2800 × 2070 mm
    Decors
    372
    From
    €71.24 per board · €12.29/m²
    • Edge banding
    • Price calculated instantly
    View boards

  • Melamine-faced MDF

    A finer, denser core. Crisper edges and better for milling, ideal for fronts.

    Thicknesses
    10, 12, 18 mm
    Board size
    2800 × 2070, 3050 × 1220 mm
    Decors
    55
    From
    €102.85 per board · €17.74/m²
    • Edge banding
    • Price calculated instantly
    View boards

Cut to size now

Popular decors

All furniture panels

Finishing

Edge banding: the finish that makes the difference

A sawn edge shows the core. Edge banding in the same colour as the decor turns a panel into a finished furniture component. We apply the banding by machine: tight, straight and durably bonded.

Colour

Every decor comes with matching edge banding, including wood decors and textures.

Thickness

1 mm for sides, 2 mm for fronts. Matt and high-gloss boards get 1 mm.

Dimensions

You enter the finished size. We allow for the thickness of the banding.

Price

1 mm €4.84 and 2 mm €7.26 per metre, incl. VAT.

Where to edge band?Advice
Front edges and frontsAlways, preferably 2 mm
Visible side and top edgesYes, 1 mm is usually enough
ShelvesFront edge only, unless the side edge is visible
Back edges and hidden edgesNot needed

Thickness

Which thickness should you choose?

We supply furniture panels in thicknesses from 8 to 38 mm. The table helps you choose; if you're unsure, feel free to call us on +31 77 30 30 181.

ThicknessCommonly used for
8 – 12 mm
available: 8, 10, 10.6, 12 mm		Back panels, drawer bottoms and wall panels
16 – 19 mm
available: 16, 18, 18.6 mm		Cabinet sides, shelves and fronts: the most popular thickness
22 – 28 mm
available: 22, 25, 25.6, 28, 28.6 mm		Heavily loaded shelves, desk tops and table tops
38 mm
available: 38 mm		Sturdy tops and special constructions

How it works

How to order furniture panels cut to size

1

Choose your board

Select the decor, core and thickness for your project.

2

Enter your cutting sizes

Finished sizes and quantities, with 1 or 2 mm edge banding per side. Give parts a name to print on the label.

3

Calculate and order

The configurator instantly calculates the most efficient cutting layout and your price. Check out securely and we'll get to work.

Start your cutting list

Tips

Tips for working with furniture panels

Mind the grain direction

On wood decors, the grain runs along the length of the board. In the cutting list, the grain direction is set to length by default: enter the length of a part in the direction you want the grain to run. You can also choose width or free rotation for each part.

Pre-drill for screws

Always pre-drill screw holes in board material, especially close to the edge. This stops the core from splitting or breaking out.

Fragile corners and edges

The corners and edges of cut panels are fragile. Lift panels when unpacking and don't slide them over each other.

Finished sizes

Each part comes out exactly the size you enter. Edge banding of 1 or 2 mm is already allowed for, so you don't need to deduct anything for it yourself.

Why furniture panels?

Strengths and limitations

Strengths

  • Ready to assemble. Cut, edge-banded and labelled per part. No primer, lacquer or sanding.
  • Hard-wearing surface. Stands up to everyday use and is easy to clean.
  • Huge choice. Plain colours, wood, stone and textures in one order.

Limitations

  • Not meant for lacquering. Want to paint it yourself? Then choose MDF with primer foil.
  • Edges need finishing. An edge without edge banding shows the core.

At a glance

Material
Chipboard or MDF with a melamine decor
Brands
Unilin en EGGER
Finishing
Machine-applied edge banding, 1 or 2 mm
Price
Per board, always up to date in the configurator
From
€71.24 per board · €12.29/m² incl. VAT

Frequently asked questions

Questions about furniture panels

Can't find your question? Call +31 77 30 30 181 or visit customer service.

Also cut to size

What is the difference between melamine-faced chipboard and MDF?

The decor is the same; the core is different. Chipboard is lighter and more affordable, which makes it the standard choice for cabinets and shelves. MDF has a finer, denser core: the edges come out crisper and the panel is easier to mill, which is especially useful for fronts.

Which edge banding do I get?

Every decor comes with matching edge banding in the same colour and texture. You choose 1 or 2 mm per side. Matt and high-gloss boards get 1 mm. A thin band is enough for side edges; for fronts and the front edges of shelves you will usually choose 2 mm.

Where is edge banding needed?

Always on front edges and fronts, and on side edges that will be visible. Shelves usually only get banding on the front edge. Back edges and edges that sit against a wall or another panel don't need banding.

Can I paint or lacquer melamine-faced panels?

We advise against it: paint doesn't adhere well to melamine. If you want to finish it yourself, choose MDF with primer foil.

How do I order furniture panels cut to size?

Choose the board and thickness, enter your net dimensions and quantities in the cutting list, and you'll instantly see the cutting layout and the price. Pay securely with iDEAL, Bancontact or credit card. The delivery time is approx. 2 weeks.

What are the minimum and maximum sizes?

Parts must be at least 25 mm, and the short side can be at most 1,500 mm. The maximum length is the length of the board.

Get started now

Your project starts here

Enter your cutting sizes in a few minutes and see the price straight away.

Start your cutting list Call +31 77 30 30 181